Jednodelna nad-dimenzionalna rolo vrata
Industrijska rolo vrata velikih dimenzija za pokrivanje većih površina, kao što su vazduhoplovni objekti, brodogradnje i vojne instalacije.
To je veoma kruta konstrukcija koja je opremljena snažnim motorima i specijalnim sistemima za otpornost na jak vetar.
Vazduhoplovni objekti STEFANOVIKIO
TEHNIČKE KARAKTERISTIKE
| ISO 487 | Steel roller chains, type S and C |
| ISO 606-82 | Short pitch transmission precision roller chains and chain wheels |
| ISO 1275-84 | Extended pitch precision roller chains and chain wheels for transmission and conveyors |
| ISO 1395-77 | Short pitch transmission precision bush chains and chain wheels |
| ISO 9633 | Cycle chains |
| ISO 10190 | Motor cycle chains |
| Sliding Sprocket | 2 |
| Sprocket tooth width bf1 | 44.9825 mm |
| Fillet radius of tooth rx | 76.2 mm |
| Width of Chamfer ba | 9.906 mm |
| Tooth roughness Ra | 6.3 µm |
| Sprocket 1 | Sprocket 2 | |
| Number of Teeth N | 9 | 27 |
| Gear Ratio i | 3 | |
| Speed n | 5 rpm | 1.6667 rpm |
| DIN 8154 | Buchsenketten mit Vollbolzen |
| DIN 8164 | Buchsenketten – Abmessungen und Bruchlasten |
| DIN 8181-70 | Rollenketten langgliedring. Entwurf |
| DIN 8187-69 | Rollenketten – Europanische Bauart |
| DIN 8188-69 | Rollenketten – Amerikanische Bauart |
| DIN 8189 | Rollenketten für Landmaschinen |
| DIN 8195 | Hülsenketten, Rollenketten – Berechnung der Antriebe |
| DIN 8196 | Verzahnung der Kettenraeder fuer Rollenketten – Profilabmessungen |
| BS 228 | Short pitch transmission precision roller chains and chain wheels |
| JIS B 1801 | Rollenketten |
| ASME/ANSI B29.1M | Precision Power Transmission Roller Chains, Attachments and Sprockets |
| Torque T | 3500 Nm | 10185 Nm | |
| Shaft Moment of Inertia I | 10 kgm2 | 10 kgm2 | |
| Pitch diameter of sprocket d | 222.794 mm | 656.371 mm | |
| Addendum diameter of sprocket da | 237.817 mm | 680.425 mm | |
| Max. diameter of sprocket rim dgmax | 116.114 mm | 549.691 mm | |
| Dedendum diameter of sprocket df | 175.164 mm | 608.741 mm | |
| Caliper Diameter Dc | 171.779 mm | 607.63 mm | |
| X Coordinate | 0 mm | 648.711 mm | |
| Y Coordinate | 0 mm | 0 mm | |
| Minimum form: | |||
| Radius of tooth space bottom ri | 24.053 mm | ||
| Radius of sprocket tooth side re | 62.872 mm | 165.752 mm | |
| Sprocket angle alpha | 130° | 137° | |
| Maximum form: | |||
| Radius of tooth space bottom ri | 24.303 mm | ||
| Radius of sprocket tooth side re | 99.451 mm | 346.365 mm | |
| Sprocket angle alpha | 110° | 117° | |
